Millipore空气过滤器 0.2um 现货促销信息
|
品牌 |
名称 |
货号 |
规格 |
|
Millipore |
空气过滤器 0.2um |
MTGR05000 |
100个/包 |
Description
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high flow rates and throughput, low extractables and particle shedding, and broad chemical compatibility.
For traceability and easy identification, each Aervent-50 filter is hot stamped with its catalogue number and lot number. Each Aervent-50 filter is integrity tested during manufacture.
Typical Applications
· Sterile venting of vessels and carboys
· Autoclave vacuum break lines
· Low volume sterile filtration of non-aqueous fluids
· Small fermenter inlet and exhaust gas filtration
Specifications
|
Materials of Construction |
|
Housing |
Polypropylene |
|
Filter |
Hydrophobic PTFE |
|
Filtration Area, cm2 |
19.6 |
|
Maximum Inlet Pressure, bar (psig) |
4.1 (60) @ 25 °C |
|
Bacterial Retention |
Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta (ATCC® 19146) per ASTM F838-83 methodology |
|
Bacterial Endotoxins |
Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
|
Gravimetric Extractables |
≤1.0 mg in 70/30 % IPA/water |
|
Sterilization |
10 autoclave cycles of 30 min @ 130 °C; not in-line steam sterilizable |
|
Integrity Test - Bubble Point |
≥1100 mbar (16 psig) nitrogen with 60/40 % IPA/water |
|
